The material in the water pot and oil by heating and stirring the mixed reaction, by vacuum pump suction emulsifying pot, the upper part of the center through emulsification pot stirring, Teflon scraper always to stir the pot body, clean the wall sticking, which including take materials continue to produce new territories, through the blade and rotary vane the shearing, compression, folding, the stirring and mixing flow homogenizer at the pot bottom of the material through the high-speed rotation of the cutting wheel and fixed cutting sleeve produced between strong shearing, shock, turbulence and other processes, the material is cut in shear joints, quickly broken into 200nm-2um because the particles in a vacuum emulsification pot, the material in the mixing process of the bubble was promptly removed.

In the high viscosity of emulsion, especially the manufacturing process of cream, ointment, emulsion products, usually the most problematic is the dispersed phase particle size and mixing the air mixed with products, due to the large particle size emulsion instability, lack luster; products will make the products mixed with air bubbles bacterial contamination, easy oxidation, and the appearance is not smooth. Aiming at the two problems, ZJR series vacuum emulsifying mixer, stirrer blade, center by stirring and scraping mixing characteristics are complementary, combined into the best way of mixing, to achieve the perfect mix of products. By adopting the method of vacuum pumping, the produced products are no longer mixed with air bubbles in the mixing process, thereby ensuring the production of high quality products with rich luster, fine and good ductility.